移动式登车桥
产品系列:登车桥移动式登车桥
产品详情
移动式登车桥用于现场无装卸货平台或需要流动装卸货物的场所,是与叉车配合使用的货物装卸辅助设备,移动式登车桥为一个移动的钢结构斜坡,装卸叉车可实现直接驶入卡车车厢内部进行批量装卸作业,解决了货车车厢与地面存在高度差叉车或人力无法直接装卸问题。
产品特点:
-动力分为手动和电动液压,电动泵站电压通常为220;
-设备载荷从4吨到15吨,高度调节范围为0.80-1.70米
-移动式液压登车桥实现货物的安全快速装卸,成倍提高装卸作业效率,适用于拖车、半挂车、货运站台等物流环节;
-为出口企业装在集装箱提供方便,无可替代;
-随时转移到工作位置,简单、便捷、省时、省力、大幅节省物流成本;
When your needs would move a fork truck or vehicle up into or out of a building or other dock height structure, you need a stationary yard ramp
When you need to move into or out of a van, box or container you have the same decision elements plus the need for a level off zone at the top before your load enters or leaves the truck
-Yard ramps help you handle freight faster off trailers!
-Yard ramps help you handle freight faster off railcars!
-Yard ramps help you handle freight faster off docks!
-Wherever you need it, yard ramps move there easily!
-Yard Ramps save you money everywhere you put it!
-YARD RAMPS cost less than the alternatives!
-YARD RAMPS delivers the best value!
-Load capacity from 4 to 15 tons
-Lifting height ranges from 0.8-1.70 meters
-Powered by Hand pump or electric power pack,in case of power pack the power supply is usually 220V,single phase.
技术参数
型号 Model No. |
载重 Machine WT. |
台面尺寸 Table Size |
工作高度 Height Range |
设备自重 Machine Size |
设备动力 Power Supply |
YDCQ-6 | 6000kg | 10500×2000mm | 900-1700mm | 2800kg | 手动或220V Hand Pump or 220V motor |
YDCQ-8 | 8000kg | 10500×2000mm | 900-1700mm | 3000kg | |
YDCQ-10 | 10000kg | 10500×2000mm | 900-1700mm | 3300kg | |
YDCQ-12 | 12000kg | 10500×2000mm | 900-1700mm | 3300kg | |
YDCQ-14 | 14000kg | 10500×2000mm | 900-1700mm | 3800kg | |
YDCQ-16 | 16000kg | 10500×2000mm | 900-1700mm | 4500kg |
升降机
上一篇:固定式登车桥
下一篇:液压登车桥