导轨式升降机

导轨式升降机

产品系列:导轨式液压升降机

导轨式升降机

产品详情



  产品介绍

  导轨式升降机是一种非剪叉式液压升降机械设备·用于二三层工业厂房,餐厅,酒楼楼层间的货物传输·高度在150-300mm,尤其适合不能开挖地坑的工作场所·并且无须上部吊点,形式多样化(单柱,双柱,四柱).设备运行平稳,导轨式升降机的导轨一般为槽钢、工字钢,方管焊接制成,操作简单可靠,货物传输经济便捷.
 

  用途

  不能到达要求的场合等比较难解决的狭小空间,可以量身打造高效率的送货平台。产品结构坚固,承载量大,升降平稳,安装维护简单方便,是经济实用的低楼层间替代电梯的理想货物输送设备。本产品主要应用于化工、高温、高压、电厂、核工业基地、炸药等防爆企业。
 

  功能

  *承载可高达30吨,实现多点控制,上下楼层互动联锁,达到安全使用;

  *现多点控制,上下楼层互动联锁,达到安全使用;

  *提升高度高,采用旁置油缸、或双测式油缸,运行平稳、无噪声、维修方便、使用寿命较长;

  *停电手动下降、紧急停止按钮,方便、快捷、实用;

  *地坑深度一般为15cm-30cm,顶层高度不受限制,可根据现场环境定做使用;

  *层门可贯通,厂房内外可相互戳开,方便、节省空间;特别适合2-3层钢结构厂房,内外部均可使用;
 

  特性

  液压电梯在具备传统曳引式电梯的安全装置的同时, 还设有:

  *溢流阀:可防止上行运动时系统压力过高

  *应急手动阀:电源发生故障时, 可使轿厢应急下降到比较近的层楼位置开门;

  *手动泵:当系统发生故障时, 可操纵手动泵打出高压油使轿厢上升到比较近的层楼位置

  *管路破裂阀:当液压系统管路破裂轿厢失速下降时, 可自动切断油路停止下降;

  *油箱油温保护:当油箱中油温超过标准设定值时, 油温保护装置发生信号, 暂停电梯使用, 当油温下降后方可启动电梯。
 

  产品优势

  成本低

  故障率低:由于采用了先进的液压系统, 且有良好的控制方式,电梯运行故障率可降低。 耗电量少:液压电梯下行时, 靠自重产生的压力驱动,大幅度节能。

  土建优势

  1、井道上方无需机房,顶层高度3.5米以上即可安装。

  2、机房可设在井道半径15米的范围内,占有面积仅3-4平方。

  3、液压电梯不设置对重装置, 提高井道面积利用率。

  4、液压电梯负荷、载重通过油缸直接作用于基坑,井道强度要求低,砖结构或砖混结构井道即可。

  安全稳定性优势

  1、 溢流阀:可防止上行运动时系统压力过高

  2、 应急手动阀:电源发生故障时, 可使轿厢应急下降到比较近的层楼位置开门,

  3、手动泵:当系统发生故障时, 可操纵手动泵打出高压油使轿厢上升到比较近的层楼位置;

  5、油箱油温保护:当油箱中油温超过标准设定值时, 油温保护装置发生信号, 暂停电梯使用, 当油温下降后方可启动电梯。

  运行成本优势

  1、故障率低:由于采用了先进的液压系统, 且有良好的控制方式,电梯运行故障率可降低。

  2、耗电量少:液压电梯下行时, 靠自重产生的压力驱动,大幅度节能。
 

  CHAIN TYPE VERTICAL CARGO LIFT

  It’s a non-scissor type lift platform mainly used to convey the cargos in the 2-3 stroeys workshop/buildings,restaurant and hotel. Its mininum height is only 150-300mm and best choice for the working site wiout pit or the pit can not be digged. No hoisting above is required and the machine could have single,double or four pillars. The guiding rail is usually made of C channel, H beam or pipes by welding. The simple and easy operation makes the good transfer much easier.
 

  Purpose:

  Its mainly used in the narrow spaces and a customized & highly-efficient cargo lift. With the strong structure,high capacity,stable travelling and simple installation & maintenance it becomes an ideal conveyer tools among the storeys in the low buidings. Many anti-explosion companies have choosen our products like the chemical industry,high-temperature company,high voltage relative units, power factories and nuclear industrial base;
 

  FUNCTIONS:

  *Max. load capacity 30 metric tons, multi-point control,interlock among floors;

  *Huge lifting height, single or double lifting cylinder, smooth operation,low noise,easy maintenance and

  Long lifetime.;

  *In case of powe failure, the platform could lower down in the manula status. The machine also has theEmergency device for the unexpected accidents;

  *Pit depth usually from 15cm-30cm or no pit required;

  *Best choice for2-3 storeys steel structure building, indoor or outdoor;
 

  CHARACTERISTICS:

  Besides the safety devices that the tradiational lifting elevators have, it still have the followings:

  * Overflow valve: can prevent upward movement when the system pressure is too high

  * Emergency manual valve: power failure occurs, can make the capsules emergency down to the nearest floor open position;

  * Manual pump: when the system failure occurs, the manual type high pressure oil pump can be manipulated to make the car up to the nearest floor location

  * Pipeline rupture valve: when the hydraulic system pipeline rupture capsules stall falls, can automatically cut off oil stopped falling;

  * Tank of oil temperature protection: when the medium oil tank temperature exceeds the set value, the oil temperature protection device of signal, suspended the use, when the oil temperature drop rear can activate the elevator.
 

  PRODUCTS ADVANTAGES:

  -THE COST IS LOW

  -CIVIL ENGINEERING ADVANTAGE

  -SECURITY STABILITY ADVANTAGES

  -RUNNING COST ADVANTAGE
 

  技术参数(仅供参考)Technical Parameters: (only for reference)

型号Model# 承载Load 台面尺寸Table size 举升高度Lifting height 非工作高度Non-working height 外形尺码Dimension 泵站
Pump station
SJDG3-2.4 3T 2.0*2.0M 2.4M 660MM 2.0*2.0*0.66m 4KW/380V
SJDG2-5 2T 2.1*1.2M 5M 870MM 2.1*1.2*0.87m 4KW/380V
SJDG1-4.5 1T 2.1*1.5M 4.5M 800MM 2.1*1.5*0.80m 3KW/380V
SJDG5-6.5 5T 2.2*1.6M 6.5M 1280MM 2.2*1.6*1.28m 5.5KW/380V
SJDG3-6.5 3T 2.2*1.9M 6.5M 1520MM 2.2*1.9*1.52m 5.5KW/380V
SJDG**-N Custom-made according to the requirement 接受定制

 

上一篇:返回列表

下一篇:单导轨式液压升降机

自行式剪叉升降机(特殊定制)
自行式剪叉升降机(特殊定制)
固定剪叉升降平台
固定剪叉升降平台
15吨移动式液压登车
15吨移动式液压登车
10吨移动式液压登车桥
10吨移动式液压登车桥
自行式升降机自行式升降机
自行式升降机自行式升降机
液压登车桥
液压登车桥